From: Brian Stewart (brian@xxxxxxxxxxxxxxxx)
Date: Sun Jul 30 2000 - 22:48:11 GMT-3
Dave,
Check this link. It's also on the DOC CD. Your missing the dspu vdlc
commands to start the dspu running over DLSW.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/ibm_c
/bcprt2/bcdspu.htm#xtocid2434336
Brian
-----Original Message-----
From: Dave McFetridge [mailto:dmcfetridge@eccinc.com]
Sent: Saturday, July 29, 2000 7:55 AM
To: 'ccielab@groupstudy.com'
Subject: DLSW HELP...
I was told I could simulate SNA traffic using dspu to test my dlsw
config/filters.
Has anyone tried this?
Here is a sample of what I tried.
R1:
source-bridge ring-group 500
dlsw local-peer peer-id 172.16.64.1 group 40 promiscuous
dlsw remote-peer 0 tcp 172.16.104.1
!
dspu pu HOST rmac 0000.303a.1f1f rsap 4 lsap 4
!
interface TokenRing0 (mac address 0007.0dc6.2d52)
ip address 172.16.64.1 255.255.255.0
ring-speed 16
source-bridge 50 1 500
dspu enable-pu lsap 4
dspu start HOST
R2:
source-bridge ring-group 500
dlsw local-peer peer-id 172.16.104.1 group 40 border promiscuous
dlsw remote-peer 0 tcp 172.16.64.1
!
dspu host HOST xid-snd 0d0d50d0 rmac 0007.0dc6.2d52 rsap 4 lsap 4
!
interface TokenRing0 (mac address 0000.303a.1f1f)
ip address 172.16.104.1 255.255.255.0
ring-speed 16
source-bridge 50 1 500
dspu enable-host lsap 4
dspu start HOST
When I use NetBeui workstations and do a find computer it works and my
dlsw
circuits connect fine so I know the dlsw is working but I want to be
able to
test my SNA LSAP filters.
Thanks in advance....
Dave McFetridge
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:59 GMT-3