From: wongfu (swong@xxxxxxxx)
Date: Fri Jul 28 2000 - 15:31:38 GMT-3
I tried looking into that but it relies on the DNS queries.
stanford
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Sreeram P Bandakavi
Sent: Friday, July 28, 2000 8:06 AM
To: ccielab@groupstudy.com
Subject: RE: GRE Tunneling & Bridging
Look CCO for examples on NAt overlapping. Its probably the easier way of
doing the same .
Sreeram
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Simcha Blatter
Sent: Friday, July 28, 2000 10:32 AM
To: ccielab@groupstudy.com
Cc: Leo Galletta; Stephen Drgon
Subject: GRE Tunneling & Bridging
Is it possible to connect 2 locations via the Internet and have both
locations share the same subnet ?
I know that this is theoretically possible by using a GRE Tunnel between the
2 routers at each location AND by
activating IRB on the routers.
(Each router will have a minimum of 3 interfaces - subnet, dmz, & Tunnel;
subnet & dmz interfaces
will route IP - subnet & Tunnel will bridge IP).
Can this work in the real world and has anybody done this before ?
The reason the 2 locations need have the same subnet is that Unix Hosts at
each location need to be configured
in a cluster group on the same subnet for disaster recovery purposes.
Thanks,
Simcha
Simcha Blatter, Systems Architect - CCDP, CCNP, MCSE, MCNE - CCIE in
progress
Dimension Data ISG
simcha.blatter@didata.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:59 GMT-3