From: Jansen (jysh@xxxxxxxxxxxxxx)
Date: Wed Jul 26 2000 - 00:00:45 GMT-3
Hi Bill
Thanks for your answer.
Maybe you are right,i solve this problem by use the ios version 12.0.3,
but i haven't set the explorer-wait-time, is there any default for it?
Another question please,i was very puzzled by the mac filter of
dlsw,can you tell me are there any differences between the filters if the
dlsw is connect ethernet-to ethernet or ethernet-to-tokenring or tokenring-to-t
okenring?
must i write the mac filter always in non-cann format?
Thanks again.
Best Regards.
Jansen
>What's probably happening is that R2 is returning the explorer packets
>significantly earlier than R1, so even though the costs are different, it
>uses the first response. Set the "dlsw timer explorer-wait-time" to several
>seconds, maybe even as high as 5 secs and this should solve your problem.
>This will cause the router to wait X number of seconds before it chooses a
>peer for the resource. This command is available starting in 11.3
>
>Bill
>
> -----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>Jansen
>Sent: Tuesday, July 25, 2000 1:29 AM
>To: ccielab
>Subject: dlsw question,pls.
>
>Hi,
> For r4, I have two dlsw peers r1 and r2, the reachability to a
>ethernet of r1 and r2 is the same,such like:
>
> PC-SERVER FOUND REMOTE 1.1.1.1(2065)---------->r1
> 2.2.2.2(2065)------------>r2
>
> but peer cost to r1 is 1,and peer cost to r2 is 5.
>
>In my opinion, circuit should be
>established between r4 and r1,when i use netbios to test the reachability
>from r4,but
>the circuit is established between r4 and r2,why?
>
>r4#show dlsw circuit detail
>Index local addr(lsap) remote addr(dsap) state uptime
>1610612771 0003.3001.18cf(F0) 0005.93c1.44b4(F0) CONNECTED
>00:00:48
> PCEP: 9DC644 UCEP: 9EE730
> Port:TB1 peer 2.2.2.2(2065)
> Flow-Control-Tx CW:20, Permitted:34; Rx CW:20, Granted:21; Op:
>Repeat
> Congestion: Low(02), Flow Op: Half: 0/0 Reset 0/0
> RIF = --no rif--
>Total number of circuits connected: 1
>
>
> Jansen
> jysh@teamsun.com.cn
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:58 GMT-3