From: Brian Stewart (brian@xxxxxxxxxxxxxxxx)
Date: Tue Jul 25 2000 - 18:52:59 GMT-3
Andy,
This should work for you...
Router1
dial-peer voice 1 voip
destination-pattern 3..
session target ipv4:(router2 ip address)
!
voice-port 1/0/0
connection plar 301
Router 2
dial-peer voice 1 pots
destination-pattern 301
port 1/0/0
the phone on router 1 will call the phone on router2 when picked up....
Brian
-----Original Message-----
From: Andy Singh
To: ccielab@groupstudy.com
Sent: 7/25/00 3:27 PM
Subject: VoIP
can any show me some pointers on how to configure a
router with FXO card to automatically dial a number
(i.e operator) when some1 picks up the phone.
phone1----router1-----ATM-----router2---phone(operator)
what do i need to do so when phone1 is off the hook it
automatically dials phone2.
thanks
Andy
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:58 GMT-3