From: John Conzone (jkconzone@xxxxxxxx)
Date: Mon Jul 24 2000 - 21:21:16 GMT-3
That works,but stops all routes. I don;t thinkthere is a way to do it.
----- Original Message -----
From: "Vijaykrishna" <vijaykrishna@netzero.net>
To: <dave.awatere@equant.com>; <ccielab@groupstudy.com>
Sent: Monday, July 24, 2000 6:50 PM
Subject: Re: OSPF and distribute lists
> try
> (config-if)#ip ospf database-filter all out
>
> u can block all the LSA outgoing on that interface !!
>
> -----Original Message-----
> From: dave.awatere@equant.com <dave.awatere@equant.com>
> To: ccielab@groupstudy.com <ccielab@groupstudy.com>
> Date: Monday, July 24, 2000 6:04 PM
> Subject: Re: OSPF and distribute lists
>
>
> >
> >
> >Don't think so. You can filter on the inbound but not the out.
> >
> >Generally you will be selective (route-maps) in what routes you add to
the
> ASBR
> >ospf database when redistributing in. Or alternatively distribute lists
> are
> >used to filter routes across the entire AS on all routers.
> >
> >R\Dave
> >
> >
> >
> >
> >"John Conzone" <jkconzone@home.com>@groupstudy.com on 07/25/2000 08:37:44
> AM
> >
> >Please respond to "John Conzone" <jkconzone@home.com>
> >
> >Sent by: nobody@groupstudy.com
> >
> >
> >To: "ccielab" <ccielab@groupstudy.com>
> >cc:
> >Subject: OSPF and distribute lists
> >
> >
> >
> > I want to make sure what I am seeing is right. It doesn't appear that I
> can
> >use distribute list out to deny ospf routes to other ospf routers. Since
> routes
> >aren't excahned, only LSA's, the LSA's are distributed regardless and
SPF
> run.
> >I can use distribute list in to prevent individual routers from placing
> routes
> >in their table.
> > Is there a way to block a OSPF route outbound to another OSPF router?
It
> >seems one would have to filter the content of an LSA. Is that possible?
> >
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:57 GMT-3