From: John Conzone (jkconzone@xxxxxxxx)
Date: Sun Jul 23 2000 - 18:40:57 GMT-3
Thanks DJ. I got it working without the doc, which means this
stuff is isnking in, but just wanted to index it for future reference
in the lab if neccessary. Its right where you said.
Thanks!
----- Original Message -----
From: D. J. Jones
To: John Conzone ; ccielab
Sent: Sunday, July 23, 2000 5:24 PM
Subject: Re: OSPF authentication
Look under the 'Configuring OSPF Interface Paramters' table..dj
----- Original Message -----
From: John Conzone
To: D. J. Jones ; ccielab
Sent: Sunday, July 23, 2000 1:43 PM
Subject: Re: OSPF authentication
DJ, thats where I went right off, but there is no authentication
there.
----- Original Message -----
From: D. J. Jones
To: John Conzone ; ccielab
Sent: Sunday, July 23, 2000 3:52 PM
Subject: Re: OSPF authentication
Try this link at Cisco's web site and see if there is any correlation
with the CD John:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgc
r/ip_c/ipcprt2/1cdospf.htm
----- Original Message -----
From: John Conzone
To: ccielab
Sent: Sunday, July 23, 2000 9:14 AM
Subject: OSPF authentication
I'm looking in the CD in 12.1 Configuration Guide and cannot find
OSPF authentication. I've looked under several topics as things are
not always where logic tell you it owuld be on these CD's. I've found
Eigrp and Rip2 authentication under the nonspecific functions section,
but no OSPF.
Anyone point me at it?
Thanks!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:57 GMT-3