From: Kevin M. Woods (kev@xxxxxxx)
Date: Sun Jul 23 2000 - 16:24:00 GMT-3
You don't need "ip ospf message-digest-key" on any of the interfaces.
However, if you do add a key then make sure all attached neighbors to
that interface [that you want to be adjacent] also have an equivalent
key and password.
Kevin
// Hi.
//
// Let's say we configure both e0, s0 of R1 and R2 in the
// same area 0 of OSPF, and we also configure authentication
// (md5) in area 0. My question is, do we need to enter
// "ip ospf message-digest-key" command on R1's s0, e0 and
// R2's s0, e0. Or do we need to just enter the command in
// R1's s0 and R2's s0 only?
//
// |
// (s1)
// (e0)R1(s0)---------------(s0)R2(e0)
//
// Thanks in advance.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:57 GMT-3