From: Clifton Stewart (cliftonlstewart@xxxxxxxx)
Date: Fri Jul 21 2000 - 12:29:08 GMT-3
Scotty,
I would say for both IPX aand AppleTalk snapshot routing for DDR. But
you should also be aware if asked to place IPX and AppleTalk for EIGRP
on backup also. See the attached URL for an example...
http://www.cisco.com/warp/public/129/21.html
Clifton Stewart-CCNA, CCIE Candidate
Scotty wrote:
>
> Hello Group
>
> I am failing the lab for the first time in early August..err taking I mean.
I
> was told that it would behoof me to know how to route IPX over a backup ISDN
> link which leads me to my question. IF you want to route IPX over ISDN backu
p
> link WITHOUT keeping the link up which is the best way to do that? Snap shot
> routing, and IPX eigrp are out and rip will pull the link up every 30/60
> seconds. What I did is make a dialer list that blokcs rip and saps and used
> static routes with higher metrics then rip to point to remote networks on th
e
> other side of the link. This works but seems laborious and non-scaleable.
> What do people usually do in this situation?
>
> Scotty
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:56 GMT-3