Re: ATM LECS / LES on CAT

From: Kent (cciecn@xxxxxxxxx)
Date: Thu Jul 20 2000 - 11:13:34 GMT-3


   
Do believe something you heared.

Kent
--- Ken Fee <kfee@cisco.com> wrote:
> Don't believe everything you've heard.
>
> Ken
>
> ----- Original Message -----
> From: "Wojtek Iwanczyk" <WIwanczyk@exenet.com>
> To: <masalmon@cisco.com>; <ccielab@groupstudy.com>;
> <sfr@mentortech.com>
> Sent: Wednesday, July 19, 2000 11:45 PM
> Subject: Re: ATM LECS / LES on CAT
>
>
> > I have heard from several sources that LANE on the
> LAB will only include
> configuring a client on an ATM backbone, and usually
> does not amount to more
> than 5 or so points on the exam ...
> >
> > Wojtek Iwanczyk
> > Sr Support Engineer
> > Exenet Technologies
> > 15 E 26th Street
> > New York, NY 10010
> > (212) 684 7300
> > wiwanczyk@exenet.com
> >
> >
> > >>> "Scott F. Robohn" <sfr@mentortech.com>
> 07/19/00 10:08PM >>>
> > You should know LANE for the R/S exam.
> >
> > 'Nuff said.
> >
> > sfr
> >
> > mark salmon wrote:
> > >
> > > You are kidding right? I spoke to someone who
> said LANE is on the R/S
> > > exam, so knowing how to configure LANE is
> critical to successfully pass
> > > the exam.
> > >
> > > Timur.Mirza@Notes.airtouch.com wrote:
> > > >
> > > > is this thread (running lane on the cat) part
> of a wan switching
> discussion or
> > > > routing/switching discussion? timur
> > > >
> > > > "Roger Wang" <rwang@genuity.net> on 07/19/2000
> 07:34:36 AM
> > > >
> > > > Please respond to "Roger Wang"
> <rwang@genuity.net>
> > > >
> > > > To: "John McCulley" <jhmac2@hotmail.com>,
> ccielab@groupstudy.com
> > > > cc: (bcc: Timur Mirza/Corporate/AirTouch)
> > > > Subject: RE: ATM LECS / LES on CAT
> > > >
> > > > Have you tried to put LEC and LES on different
> sub-interfaces?
> > > >
> > > > Rog
> > > >
> > > > > -----Original Message-----
> > > > > From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf
> Of
> > > > > John McCulley
> > > > > Sent: Tuesday, July 18, 2000 2:25 PM
> > > > > To: ccielab@groupstudy.com
> > > > > Subject: ATM LECS / LES on CAT
> > > > >
> > > > >
> > > > > Thank you for your responses on the previous
> post!
> > > > >
> > > > > After trying several suggestions that I
> received, I
> > > > > still have not been able to get the LEC to
> intialize
> > > > > on either router when the LECS and LES are
> configured
> > > > > on the Catalyst LANE module. The LECS, LES,
> BUS, and
> > > > > Client all are operational on the LANE
> Module. Again,
> > > > > once I move the LES to either router it
> works fine.
> > > > > Any suggestions??
> > > > >
> > > > > Configs:
> > > > >
> > > > > R1
> > > > > interface ATM1/0/0
> > > > > no ip address
> > > > > no ip directed-broadcast
> > > > > no ip route-cache distributed
> > > > > no atm ilmi-keepalive
> > > > > lane config config-atm-address
> 47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > > !
> > > > > interface ATM1/0/0.1 multipoint
> > > > > ip address 137.20.80.8 255.255.255.0
> > > > > no ip directed-broadcast
> > > > > lane config-atm-address
> 47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > > lane client-atm-address
> 47.00918100000000D0C08C9401.00B08E4BF820.01
> > > > > lane client ethernet ELAN1
> > > > > !
> > > > > interface ATM1/0/0.2 multipoint
> > > > > ip address 137.20.90.8 255.255.255.0
> > > > > no ip directed-broadcast
> > > > > lane config-atm-address
> 47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > > lane client-atm-address
> 47.00918100000000D0C08C9401.00B08E4BF820.02
> > > > > lane client ethernet ELAN2
> > > > > !
> > > > > r1#sh lane def
> > > > > interface ATM1/0/0:
> > > > > LANE Client: ...00B08E4BF820.**
> > > > > LANE Server: ...00B08E4BF821.**
> > > > > LANE Bus: ...00B08E4BF822.**
> > > > > LANE Config Server: ...00B08E4BF823.00
> > > > >
> > > > > R2
> > > > > interface ATM2/0/0
> > > > > no ip address
> > > > > no ip directed-broadcast
> > > > > no ip route-cache distributed
> > > > > no atm ilmi-keepalive
> > > > > lane config config-atm-address
> 47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > > !
> > > > > interface ATM2/0/0.1 multipoint
> > > > > ip address 137.20.80.7 255.255.255.0
> > > > > no ip directed-broadcast
> > > > > lane config-atm-address
> 47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > > lane client-atm-address
> 47.00918100000000D0C08C9401.00502AA29440.01
> > > > > lane client ethernet ELAN1
> > > > > !
> > > > > interface ATM2/0/0.2 multipoint
> > > > > ip address 137.20.90.7 255.255.255.0
> > > > > no ip directed-broadcast
> > > > > lane config-atm-address
> 47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > > lane client-atm-address
> 47.00918100000000D0C08C9401.00502AA29440.02
> > > > > lane client ethernet ELAN2
> > > > >
> > > > > r2#sh lane def
> > > > > interface ATM2/0/0:
> > > > > LANE Client: ...00502AA29440.**
> > > > > LANE Server: ...00502AA29441.**
> > > > > LANE Bus: ...00502AA29442.**
> > > > > LANE Config Server: ...00502AA29443.00
> > > > >
> > > > >
> > > > > Cat5 LANE Module
> > > > > lane database CCIE
> > > > > name ELAN1 server-atm-address
> > > > > 47.00918100000000D0C08C9401.00D0C08C9021.01
> > > > > name ELAN2 server-atm-address
> > > > > 47.00918100000000D0C08C9401.00D0C08C9021.02
> > > > > !
> > > > > interface ATM0
> > > > > atm preferred phy A
> > > > > atm pvc 1 0 5 qsaal
> > > > > atm pvc 2 0 16 ilmi
> > > > > lane config config-atm-address
> 47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > > lane config database CCIE
> > > > > !
> > > > > interface ATM0.1 multipoint
> > > > > lane config-atm-address
> 47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > > lane client-atm-address
> 47.00918100000000D0C08C9401.00D0C08C9020.01
> > > > > lane server-atm-address
> 47.00918100000000D0C08C9401.00D0C08C9021.01
> > > > > lane bus-atm-address
> 47.00918100000000D0C08C9401.00D0C08C9022.01
> > > > > lane server-bus ethernet ELAN1
> > > > > lane client ethernet 1 ELAN1
> > > > > !
> > > > > interface ATM0.2 multipoint
> > > > > lane config-atm-address
> 47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > > lane client-atm-address
> 47.00918100000000D0C08C9401.00D0C08C9020.02
> > > > > lane server-atm-address
> 47.00918100000000D0C08C9401.00D0C08C9021.02
> > > > > lane bus-atm-address
> 47.00918100000000D0C08C9401.00D0C08C9022.02
> > > > > lane server-bus ethernet ELAN2
>
=== message truncated ===



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:56 GMT-3