From: Brian S turner (brian@xxxxxxxxxxxxxxxxx)
Date: Thu Jul 20 2000 - 10:47:02 GMT-3
You know, I actually created a TR loopback by twisting wires together, etc.
But I could only trick my PC into thinking it was plugged into a mau 1 out
of
10 times. I was trying to test out a Token Ring sniffer.
Brian Turner
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Greg Schmitt
Sent: Thursday, July 20, 2000 7:46 AM
To: hmoll@tdk.dk; kvyoung@sina.com
Cc: ccielab@groupstudy.com
Subject: RE: cross cable for TR
Good grief! Let's not start this again (HM's reply to Kevin)!
If you have an answer for someone please give it. If not, simply do not
reply!
Kevin, I am no expert about Token Ring, but from everything I've read, seen
on this mail site, and seen in the field, there is no equivalent to a
crossover cable in the token ring world.
Cheers,
Greg Schmitt
Internetwork Solutions Engineer
ThruPoint, Inc. (formerly Total Network Solutions)
Voice: 410-349-9772
Cell: 443-822-5183
Pager: 888-773-0423 or pager.gschmitt@thrupoint.net
e-mail: GSchmitt@thrupoint.net
-----Original Message-----
From:
Sent: Thursday, July 20, 2000 8:21 AM
Subject: SV: cross cable for TR
From: A63403 <hmoll@tdk.dk>
To: Kevin Young <kvyoung@sina.com>
Cc: ccielab@groupstudy.com
Subject: SV: cross cable for TR
Date: Thu, 20 Jul 2000 14:21:20 +0200
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2650.21)
Content-Type: text/plain;
charset="gb2312"
Sender: nobody@groupstudy.com
Reply-To: A63403 <hmoll@tdk.dk>
I would say that your guestion indicates , that you havent understood
the concept of tokenring.
HM
-----Oprindelig meddelelse-----
Fra: Kevin Young [mailto:kvyoung@sina.com]
Sendt: 20. juli 2000 10:22
Til: ccielab
Emne: cross cable for TR
Hi, gangs
could i connect two router's Token Ring port(RJ45) through a cross UTP
cable? if can, what's the cable pinouts? thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:56 GMT-3