From: Ken Fee (kfee@xxxxxxxxx)
Date: Thu Jul 20 2000 - 01:28:49 GMT-3
Don't believe everything you've heard.
Ken
----- Original Message -----
From: "Wojtek Iwanczyk" <WIwanczyk@exenet.com>
To: <masalmon@cisco.com>; <ccielab@groupstudy.com>; <sfr@mentortech.com>
Sent: Wednesday, July 19, 2000 11:45 PM
Subject: Re: ATM LECS / LES on CAT
> I have heard from several sources that LANE on the LAB will only include
configuring a client on an ATM backbone, and usually does not amount to more
than 5 or so points on the exam ...
>
> Wojtek Iwanczyk
> Sr Support Engineer
> Exenet Technologies
> 15 E 26th Street
> New York, NY 10010
> (212) 684 7300
> wiwanczyk@exenet.com
>
>
> >>> "Scott F. Robohn" <sfr@mentortech.com> 07/19/00 10:08PM >>>
> You should know LANE for the R/S exam.
>
> 'Nuff said.
>
> sfr
>
> mark salmon wrote:
> >
> > You are kidding right? I spoke to someone who said LANE is on the R/S
> > exam, so knowing how to configure LANE is critical to successfully pass
> > the exam.
> >
> > Timur.Mirza@Notes.airtouch.com wrote:
> > >
> > > is this thread (running lane on the cat) part of a wan switching
discussion or
> > > routing/switching discussion? timur
> > >
> > > "Roger Wang" <rwang@genuity.net> on 07/19/2000 07:34:36 AM
> > >
> > > Please respond to "Roger Wang" <rwang@genuity.net>
> > >
> > > To: "John McCulley" <jhmac2@hotmail.com>, ccielab@groupstudy.com
> > > cc: (bcc: Timur Mirza/Corporate/AirTouch)
> > > Subject: RE: ATM LECS / LES on CAT
> > >
> > > Have you tried to put LEC and LES on different sub-interfaces?
> > >
> > > Rog
> > >
> > > > -----Original Message-----
> > > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf
Of
> > > > John McCulley
> > > > Sent: Tuesday, July 18, 2000 2:25 PM
> > > > To: ccielab@groupstudy.com
> > > > Subject: ATM LECS / LES on CAT
> > > >
> > > >
> > > > Thank you for your responses on the previous post!
> > > >
> > > > After trying several suggestions that I received, I
> > > > still have not been able to get the LEC to intialize
> > > > on either router when the LECS and LES are configured
> > > > on the Catalyst LANE module. The LECS, LES, BUS, and
> > > > Client all are operational on the LANE Module. Again,
> > > > once I move the LES to either router it works fine.
> > > > Any suggestions??
> > > >
> > > > Configs:
> > > >
> > > > R1
> > > > interface ATM1/0/0
> > > > no ip address
> > > > no ip directed-broadcast
> > > > no ip route-cache distributed
> > > > no atm ilmi-keepalive
> > > > lane config config-atm-address
47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > !
> > > > interface ATM1/0/0.1 multipoint
> > > > ip address 137.20.80.8 255.255.255.0
> > > > no ip directed-broadcast
> > > > lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > lane client-atm-address 47.00918100000000D0C08C9401.00B08E4BF820.01
> > > > lane client ethernet ELAN1
> > > > !
> > > > interface ATM1/0/0.2 multipoint
> > > > ip address 137.20.90.8 255.255.255.0
> > > > no ip directed-broadcast
> > > > lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > lane client-atm-address 47.00918100000000D0C08C9401.00B08E4BF820.02
> > > > lane client ethernet ELAN2
> > > > !
> > > > r1#sh lane def
> > > > interface ATM1/0/0:
> > > > LANE Client: ...00B08E4BF820.**
> > > > LANE Server: ...00B08E4BF821.**
> > > > LANE Bus: ...00B08E4BF822.**
> > > > LANE Config Server: ...00B08E4BF823.00
> > > >
> > > > R2
> > > > interface ATM2/0/0
> > > > no ip address
> > > > no ip directed-broadcast
> > > > no ip route-cache distributed
> > > > no atm ilmi-keepalive
> > > > lane config config-atm-address
47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > !
> > > > interface ATM2/0/0.1 multipoint
> > > > ip address 137.20.80.7 255.255.255.0
> > > > no ip directed-broadcast
> > > > lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > lane client-atm-address 47.00918100000000D0C08C9401.00502AA29440.01
> > > > lane client ethernet ELAN1
> > > > !
> > > > interface ATM2/0/0.2 multipoint
> > > > ip address 137.20.90.7 255.255.255.0
> > > > no ip directed-broadcast
> > > > lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > lane client-atm-address 47.00918100000000D0C08C9401.00502AA29440.02
> > > > lane client ethernet ELAN2
> > > >
> > > > r2#sh lane def
> > > > interface ATM2/0/0:
> > > > LANE Client: ...00502AA29440.**
> > > > LANE Server: ...00502AA29441.**
> > > > LANE Bus: ...00502AA29442.**
> > > > LANE Config Server: ...00502AA29443.00
> > > >
> > > >
> > > > Cat5 LANE Module
> > > > lane database CCIE
> > > > name ELAN1 server-atm-address
> > > > 47.00918100000000D0C08C9401.00D0C08C9021.01
> > > > name ELAN2 server-atm-address
> > > > 47.00918100000000D0C08C9401.00D0C08C9021.02
> > > > !
> > > > interface ATM0
> > > > atm preferred phy A
> > > > atm pvc 1 0 5 qsaal
> > > > atm pvc 2 0 16 ilmi
> > > > lane config config-atm-address
47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > lane config database CCIE
> > > > !
> > > > interface ATM0.1 multipoint
> > > > lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > lane client-atm-address 47.00918100000000D0C08C9401.00D0C08C9020.01
> > > > lane server-atm-address 47.00918100000000D0C08C9401.00D0C08C9021.01
> > > > lane bus-atm-address 47.00918100000000D0C08C9401.00D0C08C9022.01
> > > > lane server-bus ethernet ELAN1
> > > > lane client ethernet 1 ELAN1
> > > > !
> > > > interface ATM0.2 multipoint
> > > > lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> > > > lane client-atm-address 47.00918100000000D0C08C9401.00D0C08C9020.02
> > > > lane server-atm-address 47.00918100000000D0C08C9401.00D0C08C9021.02
> > > > lane bus-atm-address 47.00918100000000D0C08C9401.00D0C08C9022.02
> > > > lane server-bus ethernet ELAN2
> > > > lane client ethernet 2 ELAN2
> > > >
> > > > ATM#sh lane def
> > > > interface ATM0:
> > > > LANE Client: 47.00918100000000D0C08C9401.00D0C08C9020.**
> > > > LANE Server: 47.00918100000000D0C08C9401.00D0C08C9021.**
> > > > LANE Bus: 47.00918100000000D0C08C9401.00D0C08C9022.**
> > > > LANE Config Server: 47.00918100000000D0C08C9401.00D0C08C9023.00
> > > >
> > > >
> > > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:55 GMT-3