From: mark salmon (masalmon@xxxxxxxxx)
Date: Thu Jul 20 2000 - 00:59:33 GMT-3
You are kidding right? I spoke to someone who said LANE is on the R/S
exam, so knowing how to configure LANE is critical to successfully pass
the exam.
Timur.Mirza@Notes.airtouch.com wrote:
>
> is this thread (running lane on the cat) part of a wan switching discussion o
r
> routing/switching discussion? timur
>
> "Roger Wang" <rwang@genuity.net> on 07/19/2000 07:34:36 AM
>
> Please respond to "Roger Wang" <rwang@genuity.net>
>
> To: "John McCulley" <jhmac2@hotmail.com>, ccielab@groupstudy.com
> cc: (bcc: Timur Mirza/Corporate/AirTouch)
> Subject: RE: ATM LECS / LES on CAT
>
> Have you tried to put LEC and LES on different sub-interfaces?
>
> Rog
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > John McCulley
> > Sent: Tuesday, July 18, 2000 2:25 PM
> > To: ccielab@groupstudy.com
> > Subject: ATM LECS / LES on CAT
> >
> >
> > Thank you for your responses on the previous post!
> >
> > After trying several suggestions that I received, I
> > still have not been able to get the LEC to intialize
> > on either router when the LECS and LES are configured
> > on the Catalyst LANE module. The LECS, LES, BUS, and
> > Client all are operational on the LANE Module. Again,
> > once I move the LES to either router it works fine.
> > Any suggestions??
> >
> > Configs:
> >
> > R1
> > interface ATM1/0/0
> > no ip address
> > no ip directed-broadcast
> > no ip route-cache distributed
> > no atm ilmi-keepalive
> > lane config config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> > !
> > interface ATM1/0/0.1 multipoint
> > ip address 137.20.80.8 255.255.255.0
> > no ip directed-broadcast
> > lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> > lane client-atm-address 47.00918100000000D0C08C9401.00B08E4BF820.01
> > lane client ethernet ELAN1
> > !
> > interface ATM1/0/0.2 multipoint
> > ip address 137.20.90.8 255.255.255.0
> > no ip directed-broadcast
> > lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> > lane client-atm-address 47.00918100000000D0C08C9401.00B08E4BF820.02
> > lane client ethernet ELAN2
> > !
> > r1#sh lane def
> > interface ATM1/0/0:
> > LANE Client: ...00B08E4BF820.**
> > LANE Server: ...00B08E4BF821.**
> > LANE Bus: ...00B08E4BF822.**
> > LANE Config Server: ...00B08E4BF823.00
> >
> > R2
> > interface ATM2/0/0
> > no ip address
> > no ip directed-broadcast
> > no ip route-cache distributed
> > no atm ilmi-keepalive
> > lane config config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> > !
> > interface ATM2/0/0.1 multipoint
> > ip address 137.20.80.7 255.255.255.0
> > no ip directed-broadcast
> > lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> > lane client-atm-address 47.00918100000000D0C08C9401.00502AA29440.01
> > lane client ethernet ELAN1
> > !
> > interface ATM2/0/0.2 multipoint
> > ip address 137.20.90.7 255.255.255.0
> > no ip directed-broadcast
> > lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> > lane client-atm-address 47.00918100000000D0C08C9401.00502AA29440.02
> > lane client ethernet ELAN2
> >
> > r2#sh lane def
> > interface ATM2/0/0:
> > LANE Client: ...00502AA29440.**
> > LANE Server: ...00502AA29441.**
> > LANE Bus: ...00502AA29442.**
> > LANE Config Server: ...00502AA29443.00
> >
> >
> > Cat5 LANE Module
> > lane database CCIE
> > name ELAN1 server-atm-address
> > 47.00918100000000D0C08C9401.00D0C08C9021.01
> > name ELAN2 server-atm-address
> > 47.00918100000000D0C08C9401.00D0C08C9021.02
> > !
> > interface ATM0
> > atm preferred phy A
> > atm pvc 1 0 5 qsaal
> > atm pvc 2 0 16 ilmi
> > lane config config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> > lane config database CCIE
> > !
> > interface ATM0.1 multipoint
> > lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> > lane client-atm-address 47.00918100000000D0C08C9401.00D0C08C9020.01
> > lane server-atm-address 47.00918100000000D0C08C9401.00D0C08C9021.01
> > lane bus-atm-address 47.00918100000000D0C08C9401.00D0C08C9022.01
> > lane server-bus ethernet ELAN1
> > lane client ethernet 1 ELAN1
> > !
> > interface ATM0.2 multipoint
> > lane config-atm-address 47.00918100000000D0C08C9401.00D0C08C9023.00
> > lane client-atm-address 47.00918100000000D0C08C9401.00D0C08C9020.02
> > lane server-atm-address 47.00918100000000D0C08C9401.00D0C08C9021.02
> > lane bus-atm-address 47.00918100000000D0C08C9401.00D0C08C9022.02
> > lane server-bus ethernet ELAN2
> > lane client ethernet 2 ELAN2
> >
> > ATM#sh lane def
> > interface ATM0:
> > LANE Client: 47.00918100000000D0C08C9401.00D0C08C9020.**
> > LANE Server: 47.00918100000000D0C08C9401.00D0C08C9021.**
> > LANE Bus: 47.00918100000000D0C08C9401.00D0C08C9022.**
> > LANE Config Server: 47.00918100000000D0C08C9401.00D0C08C9023.00
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:55 GMT-3