From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Wed Jul 19 2000 - 17:53:33 GMT-3
Strange that I see a reply before the question (still hasn't come in and
this isn't the first time). In addition to the "remark" option for
access-lists, you have "description" available under each interface.
Brian
On Wed, 19 Jul 2000, Aaron K. Dixon wrote:
> You can use the remark command. This command was first supported in IOS
> 12.0(?)T I believe.
>
> router#config t
> Enter configuration commands, one per line. End with CNTL/Z.
> router(config)#access-list 10 ?
> deny Specify packets to reject
> permit Specify packets to forward
> remark Access list entry comment
>
> If you are running an older IOS version about all that you can do is use
> named access-lists and make your remark part of the name.
>
> Regards,
> Aaron K. Dixon
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> lee dongsik
> Sent: Wednesday, July 19, 2000 3:27 PM
> To: ccielab@groupstudy.com
> Subject: Cisco IOS remark command ?
>
>
> Does anybody know if there is any IOS equivalent for DOS "remark" ?
> Any command syntax or special symbol you can use for adding comment on
> config ?
> Thanks.
>
> - Lee
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:55 GMT-3