From: Carlos Patriawan (carlos@xxxxxxxxxx)
Date: Wed Jul 19 2000 - 08:22:42 GMT-3
it's a modular emulator usually used by telco to test and simulate their
pri/bri/cas and pots line. It works very good with AS5300.
www.zarak.com
Carlos
-----Original Message-----
From: Scott O'Donnell <sodonnell@CCSINET.com>
To: 'Carlos Patriawan' <carlos@carlos.net>
Cc: 'ccielab@groupstudy.com' <ccielab@groupstudy.com>
Date: Wednesday, July 19, 2000 3:02 AM
Subject: RE: Any inputs on ISP Dial
>What type of emulator?
>
>
>-----Original Message-----
>From: Carlos Patriawan [mailto:carlos@carlos.net]
>Sent: Wednesday, July 19, 2000 6:10 AM
>To: Robert LaGrasse; Parag Bhalerao; ccielab@groupstudy.com
>Subject: Re: Any inputs on ISP Dial
>
>
>RFC and PRI /CAS standard.
>
>Luckily we've the pots/pri/cas/bri emulator like what cisco had :-)
>
>Well, i'm now preparing for isp-dial lab also.
>
>Carlos
>-----Original Message-----
>From: Robert LaGrasse <rlagras1@tampabay.rr.com>
>To: Parag Bhalerao <parag@cisco.com>; ccielab@groupstudy.com
><ccielab@groupstudy.com>
>Date: Wednesday, July 19, 2000 1:34 AM
>Subject: Re: Any inputs on ISP Dial
>
>
>>There isn't much out there in the way of study material. Dial Solutions
>>Guides, Security Solutions Guides, and the PIX stuff on the CD you should
>>know inside out. The DSL equipment was supposed to go in yesterday, so the
>>guides for the DLSAM and the 677 might be worth looking at :). The 5300
>also
>>replaces the 5200, and the 2900 series switch needs to be configured now
>>(from what it says on the Cisco page).
>>
>>-----Original Message-----
>>From: Parag Bhalerao <parag@cisco.com>
>>To: ccielab@groupstudy.com <ccielab@groupstudy.com>
>>Date: Tuesday, July 18, 2000 10:26 AM
>>Subject: Any inputs on ISP Dial
>>
>>
>>>Hi,
>>>
>>>Anyone knows any material/books or other references for CCIE ISP Dial?
>>>
>>>GoodWills
>>>
>>>Parag
>>>CCIE# 5600
>>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:55 GMT-3