From: Price, Jamie (jprice@xxxxxxxxxxx)
Date: Tue Jul 18 2000 - 15:02:00 GMT-3
Title: RE: ISDN layer-1 deactivated
S/T or U interfaces on the router?
-----Original Message-----
From: Padhu@steinroe.com
To: ccielab@groupstudy.com
Sent: 7/18/00 12:40 PM
Subject: ISDN layer-1 deactivated
I have 2 new BRI ISDN lines. Had the ckt extened to my office and
plugged
into 2503's BRI port.configured basic-5ess as switch type...reloaded
and
tried and sh int bri0
shows i/f up but spoofing ...I took the router over to the demark and
connect the router directly and it still didnt work. layer-1
deactivated.
I am using a 2503 ..It has a BRI port..Am i missing something or
should
i
work with the telco ? Thanks .
Cheers,Padhu
newyork#sh isdn status
The current ISDN Switchtype = basic-5ess
ISDN BRI0 interface
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
Layer 2 NOT Activated
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 0
Total Allocated ISDN CCBs = 0
newyork#sh int bri0
BRI0 is up, line protocol is up (spoofing)
Hardware is BRI
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, rely 255/255, load 1/255
Encapsulation PPP, loopback not set
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0 (size/max/drops); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/0/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 9 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:54 GMT-3