Re: intro

From: Wojtek Iwanczyk (WIwanczyk@xxxxxxxxxx)
Date: Tue Jul 18 2000 - 14:11:40 GMT-3


   
Any relevant commands would have to do more with the configuration of ATM itsel
f ( interface, addressing), than in turn affect the performance of a routing pr
otocol such as EIGRP, etc .. the following is an example of and "ATM" command t
hat can affect the functionality of a routing protocol or other traffic ...

atm-nsap
To define an ATM map statement for an SVC, use the atm-nsap map-list configurat
ion command in conjunction with the map-list global configuration command. The
no form of this command removes the address.

protocol protocol-address atm-nsap atm-nsap-address [class class-name] [broadca
st]
no protocol protocol-address atm-nsap atm-nsap-address [class class-name] [broa
dcast]

protocol One of the following keywords: appletalk, apollo, bridge, clns, decne
t, ip, ipx, vines, xns.
protocol-address Destination address that is being mapped to this SVC.
atm-nsap-address Destination ATM NSAP address. Must be exactly 40 hexadecimal
digits long and in the correct dotted format.
class class-name (Optional) Name of a table that contains encapsulation-specif
ic parameters. Such a table can be shared between maps that have the same encap
sulation.
broadcast (Optional) Indicates this map entry is to be used when the correspon
ding protocol sends broadcast packets to the interface--for example, Interior G
ateway Routing Protocol (IGRP) updates.

for more check ...
http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/cs/csprtw/csa
tm.htm

Wojtek Iwanczyk
Sr Support Engineer
Exenet Technologies
15 E 26th Street
New York, NY 10010
(212) 684 7300
wiwanczyk@exenet.com

>>> "Patrick Duroseau" <pduroseau@marnictech.com> 07/18/00 01:13PM >>>
Hi, I've been trying to find documentation that talks about specifics
required for configuring EIGRP over ATM. Does anyone have any insight?

Thanks
---------------------------------
Patrick Duroseau
Marnic Technologies Inc.
Phone: 877-627-6421
Fax: 877-627-6423
email: pduroseau@marnictech.com
www.marnictech.com

"Improving Today's Business w/ Tomorrow's Solutions"
----- Original Message -----
From: <Timur.Mirza@Notes.airtouch.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, July 18, 2000 11:49 AM
Subject: intro

>
>
>
> hello, my name is timur mirza...my 2nd attempt is @ rtp on 10/14-15...i
studied
> & practiced for 9 mos b4 i took my exam last month in san jose...knowing
> everything is just a prereq, the other two intangibles are being ice under
> pressure & interpreting tricky questions that are loaded w/
restrictions...using
> the cd to set up something is a futile endeavor...if its to check
something
> quick, ok fine, but if you don't know how to run eigrp over atm, you
cannot just
> sit there & read about it while the clock is ticking!!
>
> sr net engr
> verizon wireless
> irvine, california
>
>



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:54 GMT-3