From: Johnson, Charles (Charles.Johnson@xxxxxxxxxx)
Date: Tue Jul 18 2000 - 12:53:28 GMT-3
You can find a brief discussion of configuration server addressing at
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/switch_c
/xcprt7/xclane.htm#xtocid558025
The command reference gives a little more on each command:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/switch_r
/xrlane.htm
I don't know a show command to verify what address your configuration server wi
ll use unless you use the "lane config auto-config-atm-address" command to use
the default.
Does anyone know a show command other than "show lane default-atm-addresses" to
display the address of a configuration server you have created?
-----Original Message-----
From: mark salmon [mailto:masalmon@cisco.com]
Sent: Tuesday, July 18, 2000 10:06 AM
To: Richard_Woo@infonet.com
Cc: ccielab@groupstudy.com
Subject: Re: Undocumented commands
OH yes. I had an issue recently when I tried to configure LANE and it
would not work. I called TAC and the guy told me of a command to
automatically generate the LECS address. IT is "LANE config
auto-config-atm-address" I have been unable to find documentation on
this command, yet if you do context sensitive help, it is there.
BTW, the guy said that it should be used on LANE modules, although I
used it on routers too.
Richard_Woo@infonet.com wrote:
>
> All,
>
> Is there such thing as undocumented commands?
> I have a full set of Cisco Documentation and was wondering if these books
> actually contain all the commands I need to know.
> I think it is reasonable question to ask. (well, I think)
> And, of course, please respond within the NDA.
> TIA.
>
> Richard
> P.S. they are IOS 12.0
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:54 GMT-3