From: Nnanna Obuba (obuba@xxxxxxxxx)
Date: Tue Jul 18 2000 - 11:25:10 GMT-3
What protocol are you dealing with here? IP, IPX or
Appletalk?
--- Sam Munzani <sam@chinet.com> wrote:
> I am not sure if EIGRP and other Link state
> protocols need Split
> Horrizons because they don't send out routing
> updates. All they do is have
> neighboring relationship and send out link state
> information. EIGRP is
> hybrid so not sure but check ACRC book. That covers
> all characteristics of
> EIGRP in detail.
>
> Sam
>
> On Tue, 18 Jul 2000, Lawrence Dwyer wrote:
>
> > what was the scenario?
> > FR Maps? do you have a partial config? Just std
> EIGRP between a hub and
> > two spokes on a single physical interface with 2
> frame map statements?
> > I want to throw it up in the lab to see, but I
> would like it to be close
> > to what you had.
> > Larry
> >
> > John Conzone wrote:
> >
> > > Yes, exactly. In fact I was double
> checking the Caslow book
> > > before i sent the mail. My hub is 11.1, one of
> the spokes is 11.3, and
> > > the other spoke is 12.1. At first I thought it
> might be just the 12.1
> > > code, but it happens int the 11.3 spoke as well.
> > >
> > > ----- Original Message -----
> > > From: Lawrence Dwyer
> > > To: John Conzone
> > > Cc: ccielab
> > > Sent: Monday, July 17, 2000 7:53 PM
> > > Subject: Re: Eigrp split horizon
> > > In other words, it works like it is
> supposed to after you
> > > enter the command no split which should be
> default for that
> > > config?
> > >
> > > According to Caslow,
> > > SH is DIS on FR physical interfaces
> > > SH is EN on FR point-2-point IP subints
> > > SH is EN on FR multipt. subints
> > >
> > > Unless it is a bug in yur particular IOS
> ver.
> > > I will try it tomorrow night with both 12.0
> and 11.1
> > > Larry
> > >
> > > John Conzone wrote:
> > >
> > > > I have a hub and spoke config with FR,
> and am running
> > > > EIGRP. The hub will not pass spoke routes
> to other spokes
> > > > unless I have split horizon disabled on
> the hub serial
> > > > int. I am using all physical interfaces.
> By default, split
> > > > horizon should be already disabled on a FR
> physical
> > > > int. Anyone else run into this?
> > >
> > --
> > Lawrence Dwyer, MCSE CCNA
> > Project Officer
> > Telemedicine Advanced
> > Technology Research Center
> >
> > (301) 619-7946
> >
> >
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:54 GMT-3