RE: ping multicast addr of myself on serial interface

From: Chia Kim Seng, Sr Network Spec, SCS-Networks (chiaks@xxxxxxxxxxxxxxxxxxxxxx)
Date: Fri Jul 07 2000 - 07:29:52 GMT-3

• Next message: Bob Reed: "PAP Authentication"
• Previous message: Eddie M. Parra: "RFC question..."
• Maybe in reply to: xuping: "ping multicast addr of myself on serial interface"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Just a wild guess.
How about trying using extended ping from R1.

Regards,

-----Original Message-----
From: xuping [mailto:cnmiecxu@public.bta.net.cn]
Sent: Thursday, July 06, 2000 12:41 AM
To: ccielab@groupstudy.com
Subject: ping multicast addr of myself on serial interface

Hi
I have only two routers connected B-to-B via serial, here is config

R1
!
ip multicast routing
!
interface serial 0
 ip address 1.1.1.1 255.255.255.0
 ip pim dense-mode
 ip igmp join-group 224.1.1.1
 clock rate 64000

R2
!
ip multicast routing
!
interface serial 0
 ip address 1.1.1.2 255.255.255.0
 ip pim dense-mode
!

Whe I ping 224.1.1.1 from R2, it's ok; but I can't ping 224.1.1.1 from R1,
why?
(the interfaces are up up, unicast pings are ok)

TIA
xuping

• Next message: Bob Reed: "PAP Authentication"
• Previous message: Eddie M. Parra: "RFC question..."
• Maybe in reply to: xuping: "ping multicast addr of myself on serial interface"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:52 GMT-3