From: pkm@xxxxxxxxxx
Date: Wed Jul 05 2000 - 22:33:18 GMT-3
The routes.
Matt Holbert wrote:
> Will this prevent the hellos? I would assume it will only prevent the
> actual routes.
>
> > -----Original Message-----
> > From: pkm@calweb.com [mailto:pkm@calweb.com]
> > Sent: Wednesday, July 05, 2000 2:00 AM
> > To: Zaitsev DN (Dmitry)
> > Cc: 'ccielab@groupstudy.com'
> > Subject: Re: Filtering Appletalk EIGRP Hellos
> >
> >
> > Create an access-list and applied to whatever interface you want
> >
> > 1) create access-list
> > access-list 600 deny cable-range xx-yy
> > access-list 600 permit other-access
> >
> > 2) filter routing updates with a distribute-list 600-699
> > out/in statement
> > int s0 (for example)
> > appletalk cable-range 124-124 124.1
> > appletalk zone Frame
> > appletalk protocol eigrp
> > no appletalk protocol rtmp
> > appletalk distribute-list 600 out/in
> > no appletalk eigrp-splithorizon (if hub router/partial mesh topology)
> >
> > this filter will prevent specific cable-range to be
> > advertised out s0 or
> > received on s0
> >
> > this access-list will allow you to filter routing updates for
> > AT Eigrp,
> > especially if AT EIGRP is configured on the frame-relay network.
> >
> > Sincerely,
> >
> > Phillip Moulay
> >
> > Zaitsev DN (Dmitry) wrote:
> >
> > > How do I create access list to filter appletalk EIGRP
> > hellos? I can't find
> > > a right syntax for it.
> > > thanks
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:52 GMT-3