From: David B. Knill (david.knill@xxxxxxxxxxxxxxxxx)
Date: Wed Jul 05 2000 - 16:52:55 GMT-3
#1 is the "new" way (12.0 and later) of defining ATM PVCs. #2 is the "old"
way (11.3 and earlier). You will find this in the documentation under the
different versions.
I would suggest using the 12.0 method -- David
------------------------------------------------------
David B. Knill
Sprint ENS -- Technical Solutions Consultant -- CCDP
Email david.knill@sprintparanet.com
Pager 800.941.8263
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Zaitsev DN (Dmitry)
Sent: Wednesday, July 05, 2000 12:22 PM
To: 'ccielab@groupstudy.com'
Subject: ATM Inverse ARP on PVC
It appears to me that there are two ways to avoid using Inverse ARP with
ATM PVC and assign remote ip address to the PVC.
1. Using "protocol" command:
interface atm 5
pvc [name] vpi/vci
protocol protocol x.x.x.x
2. Using "map-list" and "map-group"
interface atm 5
map-group test-a
map-list test-a
ip 131.108.168.2 atm-vc 1 broadcast
What is the difference between them?
thanks
Dmitry
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:52 GMT-3