From: pkm@xxxxxxxxxx
Date: Wed Jul 05 2000 - 02:59:39 GMT-3
Create an access-list and applied to whatever interface you want
1) create access-list
access-list 600 deny cable-range xx-yy
access-list 600 permit other-access
2) filter routing updates with a distribute-list 600-699 out/in statement
int s0 (for example)
appletalk cable-range 124-124 124.1
appletalk zone Frame
appletalk protocol eigrp
no appletalk protocol rtmp
appletalk distribute-list 600 out/in
no appletalk eigrp-splithorizon (if hub router/partial mesh topology)
this filter will prevent specific cable-range to be advertised out s0 or
received on s0
this access-list will allow you to filter routing updates for AT Eigrp,
especially if AT EIGRP is configured on the frame-relay network.
Sincerely,
Phillip Moulay
Zaitsev DN (Dmitry) wrote:
> How do I create access list to filter appletalk EIGRP hellos? I can't find
> a right syntax for it.
> thanks
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:52 GMT-3