From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Wed Jun 28 2000 - 15:51:00 GMT-3
There is a "match-host" command:
ip nat pool test 135.89.1.1 135.89.31.254 89.1.0 netmask
255.255.0.0 type match-host
Brian
On Wed, 28 Jun 2000, Roy Grego wrote:
> Hello,
>
> Is there a way to translate network address portion of
> the IP address using NAT & leave the host portion in
> place?
>
> I have 12(1).2 code & I have tried the ip nat inside
> source network command. Using a /16 addresses.
>
> Debug shows: Address (Global side address) already in
> use on attached network
>
> YET the(Global side address) is not in the routing
> table or anywhere else?
>
> Thanks,
> ROY
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:43 GMT-3