From: Sanjeewa.Alahakoon@xxxxxxxx
Date: Sun Jun 25 2000 - 03:40:33 GMT-3
Hi,
This is a real life situation..
RTR1 - S0.1 -------- F/R --------- S0.6 RTR2
RTR1
interface Serial0.1 point-to-point
description --- To RTR2 - S0.6 - CIR 64K - EIR 0
ip address 10.48.180.229 255.255.255.252
ip ospf hello-interval 30
frame-relay interface-dlci 413 IETF
RTR2
interface Serial0.6 point-to-point
description --- To RTR1 - S0.1 - CIR 64K - EIR 32
ip address 10.48.180.230 255.255.255.252
ip ospf cost 75
ip ospf hello-interval 30
frame-relay interface-dlci 413 IETF
class 64k
!
1/ Once,
I could not ping from RTR1 owninterface 10.48.180.229
BUT I could PING RTR2 10.48.180.230 from RTR1
and If I'm not mistaken I could PING RTR1 from RTR2 (not sure whether I did
it though)
and for some reason Now I can ping my own interface
Do you know why ??
2/ When I ping RTR2 from RTR I get 136/140/160 ms, BUT when I ping RTYR1 own
interface I get 276/277/284 ms
I could imagine that Packet is going to RTR2 and bounce back to RTR1,becaus
e
of the IP to DLCI mapping, is that right ??
If YES,
Then Why don't I see any activity for "deb ip packet" in RTR2, does reverse ma
p
happen in layer 2 itself ??
3/ Can Someone guide me to a CCO or any other URL,
Regards
Sanjeewa
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:43 GMT-3