From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Fri Jun 23 2000 - 19:32:32 GMT-3
224.0.0.5 and 224.0.0.6 are for ospf. Are you doing redistribution
into ospf? The problem you describe can happen if you run eigrp or some
other protocol you're running knows about the network assigned to the bri
or dialer and you're redistributing that protocol into ospf. This usually
happens when you use a 10.x.x.x address and under eigrp you say "network
10.0.0.0". So when the isdn link goes down, eigrp flushes the 10 route
and that info is passed along to ospf. ospf then floods that new
information and the isdn link comes back up.
Brian
2 days and a wake up to RTP!
On Fri, 23 Jun 2000, Mike wrote:
> I've set up OSPF On-Demand circuits over an ISDN link. The problem is
> that is never stays down. It goes down and then comes back due to
> 224.0.0.5... Any ideas what else is needed. More filters?????
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:43 GMT-3