From: Matt Lachberg 3 (Cisco@xxxxxxxxxxxxxx)
Date: Fri Jun 23 2000 - 05:04:41 GMT-3
This configuration is on the Web site:
RTC#
router bgp 300
neighbor 3.3.3.3 remote-as 200
neighbor 3.3.3.3 route-map check-community in
route-map check-community permit 10
match community 1
set weight 20
route-map check-community permit 20
match community 2 exact
set weight 10
route-map check-community permit 30
match community 3
ip community-list 1 permit 100
ip community-list 2 permit 200
ip community-list 3 permit internet
-
-
-My question lies with the last route-map statement. couldnt you just have
it :
route-map check-community permit 30
and leave out the match community 3 if you wanted to permit everything else?
thanks in advance
Matthew Lachberg
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:43 GMT-3