RE: Hook Up Two Aux Ports via Rolled Cable

From: David B. Knill (david.knill@xxxxxxxxxxxxxxxxx)
Date: Tue Jun 20 2000 - 12:58:39 GMT-3

Next message: B168277@xxxxxxx: "ccielab groupstudy e-mail"
Previous message: Hedlund, Brad: "RE: Hook Up Two Aux Ports via Rolled Cable"
Maybe in reply to: David H. Fu: "Hook Up Two Aux Ports via Rolled Cable"
Next in thread: Jim Schrader: "RE: Hook Up Two Aux Ports via Rolled Cable"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Follow this link on CCO:

http://www.cisco.com/warp/public/793/access_dial/auxback.html

------------------------------------------------------
David B. Knill
Sprint ENS -- Technical Solutions Consultant -- CCDP
Email david.knill@sprintparanet.com
Pager 800.724.3508 pin 3828206

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
David H. Fu
Sent: Tuesday, June 20, 2000 8:05 AM
To: ccielab@groupstudy.com
Subject: Hook Up Two Aux Ports via Rolled Cable

Does anyone know how to configure that?

Thanks in advance.

=====
David H. Fu
347.661.7130 Mobile
David_Fu@yahoo.com

Next message: B168277@xxxxxxx: "ccielab groupstudy e-mail"
Previous message: Hedlund, Brad: "RE: Hook Up Two Aux Ports via Rolled Cable"
Maybe in reply to: David H. Fu: "Hook Up Two Aux Ports via Rolled Cable"
Next in thread: Jim Schrader: "RE: Hook Up Two Aux Ports via Rolled Cable"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:43 GMT-3