From: Vijaykrishna (vijaykrishna@xxxxxxxxxxx)
Date: Sat Jun 17 2000 - 19:40:42 GMT-3
This is referring to the example in Tan Nam-Kee book.
On page 133 under the bri0 config there is "dialer map llc2" applied for
DLSw over ISDN example.
However since it is running DLSw TCP peers across the ISDN, I don't get why
you need llc2 dialer mapping under bri0. The SNA/NtBIOS llc2 packets might
have already encapsulated(?) into IP before sending across bri0.
Moreover the bri0 is routed interface.
Am I correct or missing something ?
-vijay
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:42 GMT-3