Re: If the Break key function is disabled

From: Kent (cciecn@xxxxxxxxx)
Date: Thu Jun 15 2000 - 10:28:44 GMT-3

• Next message: Kent: "Re: If the Break key function is disabled"
• Previous message: Brian Hescock: "Re: If the Break key function is disabled"
• Maybe in reply to: Chandra: "If the Break key function is disabled"
• Next in thread: Kent: "Re: If the Break key function is disabled"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
You can not disable the Break key when the router is
reloaded, the disable only prevent you from using the
Break key without reload the router.

Kent
--- Brian Hescock <bhescock@cisco.com> wrote:
> Well, if you could configure the config-register
> that would mean you had
> the password... so I'll I can think of is replacing
> the NVRAM. Otherwise,
> you probably have bought yourself a nice boat
> anchor.
>
> Brian
>
> On Thu, 15 Jun 2000, Chandra wrote:
>
> > Hi
> > If the Break key is disabled in the config
> register, how do we do password
> > recovery?
> > Regards
> > Chandra
> >
> >
>

• Next message: Kent: "Re: If the Break key function is disabled"
• Previous message: Brian Hescock: "Re: If the Break key function is disabled"
• Maybe in reply to: Chandra: "If the Break key function is disabled"
• Next in thread: Kent: "Re: If the Break key function is disabled"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:42 GMT-3