From: Ryan B (rbenigno@xxxxxxxx)
Date: Wed Jun 14 2000 - 17:08:59 GMT-3
Also, make sure you know the diffrent break key sequences...
http://www.cisco.com/warp/public/701/61.html
-Ryan
----- Original Message -----
From: "Brian Hescock" <bhescock@cisco.com>
To: "Rob Barton" <rob.barton@telus.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, June 14, 2000 10:46 AM
Subject: Re: password recovery
> There is a string you can send that involves the brackets [ or something
> like that but I believe it only works if doing it from a unix box. Other
> than that I believe you would need to connect directly to the router to do
> the break sequence.
>
> Brian
>
>
> On Wed, 14 Jun 2000, Rob Barton wrote:
>
> > I think a pretty good troubleshooting trick they might play would be to
> > change your enable password on a router. The Caslow book goes through
> > how to hack the enable password on 2500 and 36xx series routers.
> >
> > The question is: to get into rommon mode, you need to press the "break"
> > key; is there any way to get this to work through a terminal server, or
> > do you need to connect your PC directly to the conslole port of the
> > router in question?
> >
> > - Rob.
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:42 GMT-3