From: jaime.salazar@xxxxxxxxxx
Date: Wed Jun 14 2000 - 13:32:48 GMT-3
Hi all,
I got a problem with my Lotus Notes, I am sorry for these repetitive mails
.
Regards
Jaime
Randall Scheffer <rscheffe@allstar.com>@groupstudy.com on 06/14/2000 08:44:13 A
M
Please respond to Randall Scheffer <rscheffe@allstar.com>
Sent by: nobody@groupstudy.com
To: "'abdul_rahim@ccsi.canon.com'" <abdul_rahim@ccsi.canon.com>,
ccielab@groupstudy.com
cc:
Subject: RE: DDR config with EIGRP and OSPF
Have you made bridge traffic interesting?
Randall
-----Original Message-----
From: abdul_rahim@ccsi.canon.com [mailto:abdul_rahim@ccsi.canon.com]
Sent: Saturday, June 10, 2000 4:22 PM
To: abdul_rahim@ccsi.canon.com
Cc: chenhao; ccielab@groupstudy.com
Subject: Re: DDR config with EIGRP and OSPF
Thanks Chenn
Its working and Its working perfect
No default routes not Floating static routes needed at all
Thanks again
The only problem is that the bridging traffic does not flows
Although I have enabled the particular brodgin group on the BRI interfaces
and also I have added the dialer map bridge nam rm broadcast
BNut still it does not work
Any feedbacks would be highly appreciated
Thanks
Abdul Rahim
abdul_rahim@ccsi.canon.com on 06/07/2000 10:02:36 AM
Please respond to abdul_rahim@ccsi.canon.com
To: "chenhao" <chenhao@snm.szptt.net.cn>
cc: ccielab@groupstudy.com (bcc: Abdul Rahim/IS
Operations/Operations/CCSI)
Subject: Re: DDR config with EIGRP and OSPF
Hi
I read the basic prerequisitives of it and it said that
The router must have an NT1 or T1 attach to it which supports V.25 bis
signalling
But I do have a BRI U port on my 2611
Do you think it will work ?
The rest concept seems that using this dialer watch I can use EIGRP with
DDR
Looking back for your feedback
Thanks
Abdul
"chenhao" <chenhao@snm.szptt.net.cn> on 06/07/2000 06:45:01 AM
Please respond to "chenhao" <chenhao@snm.szptt.net.cn>
To: ccielab@groupstudy.com
cc: (bcc: Abdul Rahim/IS Operations/Operations/CCSI)
Subject: Re: DDR config with EIGRP and OSPF
hello,abdul_rahim:
You can use the Dialer watch. See the following URL:
http://127.0.0.1:8080/cc/td/doc/product/software/ios113ed/113t/113t_2/dwatc
h
.htm
Best regards!
----- Original Message -----
From: <abdul_rahim@ccsi.canon.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, June 07, 2000 4:52 AM
Subject: DDR config with EIGRP and OSPF
> Hi Can any body forward me some DDR configs with EIGRP
> Thanks
> Abdul
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:42 GMT-3