Re: dlsw icanreach

From: Kent (cciecn@xxxxxxxxx)
Date: Tue Jun 06 2000 - 17:41:03 GMT-3

• Next message: abdul_rahim@xxxxxxxxxxxxxx: "DDR config with EIGRP and OSPF"
• Previous message: Jason T. Rohm: "Dialer Pools with Async Interfaces"
• Maybe in reply to: Rob Barton: "dlsw icanreach"
• Next in thread: Greenjeepp@xxxxxxx: "Re: dlsw icanreach"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I would guess, after it really talks with that MAC
address, it should confirm it.

Kent
--- Rob Barton <rob.barton@telus.com> wrote:
> I have a question related to "dlsw icanreach." I
> am trying to
> configure the dlsw icanreach command on a router 1.
> On the dlsw peer
> router I use the "show dlsw reachability" command
> and it always tells me
> that the status is "UNCONFIRM." Does anybody know
> why this is, and if
> you and make it "confirm" the mac address?
>
> Thanks.
> - Rob.
>
> My dlsw icanreach command looks like:
> eu#dlsw icanreach mac-address 2000.1234.0000 mask
> ffff.ffff.ff00
> !
>
>
> berlin#sh dlsw reachability
> DLSw Local MAC address reachability cache list
> Mac Addr status Loc. port
> rif
>
> DLSw Remote MAC address reachability cache list
> Mac Addr status Loc. peer
> 2000.1234.0000 UNCONFIRM REMOTE 190.19.15.1(2065)
>
> DLSw Local NetBIOS Name reachability cache list
> NetBIOS Name status Loc. port
> rif
>
> DLSw Remote NetBIOS Name reachability cache list
> NetBIOS Name status Loc. peer
>
>
>
>

• Next message: abdul_rahim@xxxxxxxxxxxxxx: "DDR config with EIGRP and OSPF"
• Previous message: Jason T. Rohm: "Dialer Pools with Async Interfaces"
• Maybe in reply to: Rob Barton: "dlsw icanreach"
• Next in thread: Greenjeepp@xxxxxxx: "Re: dlsw icanreach"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:41 GMT-3