From: John Conzone (jkconzone@xxxxxxxx)
Date: Sun Jun 04 2000 - 16:17:25 GMT-3
Hi, all. I have a scenario where I have a lan whose deafult
gateway is a PIX to get to the net. (Actually 2 running failover). The
PIX outside then defaults to one internet router.
I'm adding a second router to the same ISP and want to load
balance out to the net from the PIX. I can't think of a way to do this
directly from the PIX (my reading says PIX doesn't support dynamic
routing or dual defaults, but hopefully I read wrong!) without putting
a third router in between the pix and the 2 ISP routers and put 2
defaults in that router or run a routing protocol bewteen the 2 isp
routers and the third router and advertise deafults from the 2 isp
routers.
First, does anyone from their experience know of a way to do this
without the third router?
If not, if I use dual static defaults, if one of the routers goes
down, the route will still be in there so I'm thinking if I have to go
with the third router having it receive dynamic defaults fron the ISP
routers is best.
Thanks!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:40 GMT-3