Auto RP and Default RP ?

From: Muthu Mohanasundaram (mmsundar@xxxxxxxxx)
Date: Fri Jun 02 2000 - 22:47:20 GMT-3

• Next message: Byju Pularikkal: "neighbor command with eigrp"
• Previous message: Mosley, Arthur: "RE: New CCIE - Lesson learned"
• Next in thread: Kevin M. Woods: "Re: Auto RP and Default RP ?"
• Maybe reply: Kevin M. Woods: "Re: Auto RP and Default RP ?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi All,

I am configuring IP multicasting in sparse-mode.
I wanted to use Auto RP.

R1------R2-----R3 are all configured for
multicasting.

R3 is configured as the RP and the RP mapping agent
for a multicast group, say 227.0.9.9.

Do I need to give "ip pim rp-address x.x.x.x" command
on R1 and R2, statically ? Doc CD is not clear.

Thanks in advance,

Mohan.

• Next message: Byju Pularikkal: "neighbor command with eigrp"
• Previous message: Mosley, Arthur: "RE: New CCIE - Lesson learned"
• Next in thread: Kevin M. Woods: "Re: Auto RP and Default RP ?"
• Maybe reply: Kevin M. Woods: "Re: Auto RP and Default RP ?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:40 GMT-3