From: Ryan B (rbenigno@xxxxxxxx)
Date: Fri Jun 02 2000 - 15:13:57 GMT-3
Maybe they updated this because I complained =) It defiantly wasn't
on there last time I looked but it was on my lab... Also, the 1900
still isn't on the list...
-Ryan
----- Original Message -----
From: Lawrence Dwyer
To: Ryan B
Cc: tariq sharif ; ccielab@groupstudy.com
Sent: Friday, June 02, 2000 11:05 AM
Subject: Re: Token Ring in CCIE Lab?
From the R+S Blueprint
Cat 3900 is on the CCIE R+S equipment list.
http://www.cisco.com/warp/public/625/ccie/certifications/routing.h
tml#43
"Equipment List
2500 series routers
2600 series routers
3600 series routers
4000 and 4500 series routers
3900 series token ring switches
Catalyst 5000 series switches "
Larry
Ryan B wrote:
These aren't on the equipment list, but I'd recommend you know them
anyway... For the Cat 3920 (TokenRing) and Cat 1924 switch know
how to setup VLAN's, port speed, duplex, and the management
interface. As far as routing, two 2502's should be fine, you can
use Virtual TR interfaces for stub networks. -Ryan, CCIE #5847
----- Original Message -----
From: tariq sharif
To: ccielab@groupstudy.com
Sent: Thursday, June 01, 2000 10:40 AM
Subject: Token Ring in CCIE Lab?
How much Token Ring is there in the Lab? Will 1 or 2 Cisco 2502
cover you for this? Many thanks.
--
Lawrence Dwyer, MCSE CCNA
Project Officer
Telemedicine Advanced
Technology Research Center
(301) 619-7946
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:40 GMT-3