From: abdul_rahim@xxxxxxxxxxxxxx
Date: Tue May 30 2000 - 16:41:48 GMT-3
If you enter the following network in the ospf routing process
network 1.1.1.1 255.255.255.255 area 1
It automatically gets converted to
network 1.1.1.1 0.0.0.0 area 1
in the running config
Is this only happening with me or there is some logic behind it,Actuallt
Instead of writing
network 0.0.0.0 255.255.255.255 arae 2
I just entered 1.1.1.1 instead of 0.0.0.0 because both mean the same thing
to me as long as the mask is 255.255.255.255 ( which means donot match any
bit)
feedbacks would be highly appreciated
Thanks
Abdu;
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:32 GMT-3