From: Jim Bond (trycisco@xxxxxxxxx)
Date: Mon May 29 2000 - 21:32:45 GMT-3
Hello,
I encountered this problem: 3640 BRI dials into
AS5200. Link comes up for 3 or 4 seconds, then drops.
Debug ppp authentication shows it passed
authentication, debug isdn q931 shows the following,
what does "invalid message for call state 10" mean?
Thanks in advance.
Jim
5d00h: ISDN BR0/0: Outgoing call id = 0x96D2
5d00h: ISDN BR0/0: Event: Call to 0015106511084 at 64
Kb/s
5d00h: ISDN BR0/0: TX -> SETUP pd = 8 callref = 0x4B
5d00h: Bearer Capability i = 0x8890
5d00h: Channel ID i = 0x83
5d00h: Called Party Number i = 0x80,
'0015106511084'
5d00h: ISDN BR0/0: Ux_BadMsg(): Invalid Message for
call state 10, call id 0x96D
0, call ref 0x49, event 0x1310
5d00h: ISDN BR0/0: RX <- SETUP_ACK pd = 8 callref =
0xCB
5d00h: Channel ID i = 0x8A
5d00h: ISDN BR0/0: received HOST_INFORMATION call_id
0x96D2..
5d00h: ISDN BR0/0: Ux_BadMsg(): Invalid Message for
call state 10, call id 0x96D
0, call ref 0x49, event 0x1320..
5d00h: ISDN Event: dsl 0 call_id 0x96D2 B channel
assigned by switch 1
ISDN BR0/0: RX <- ALERTING pd = 8 callref = 0xCB
5d00h: ISDN BR0/0: received HOST_ALERTING call_id
0x96D2
5d00h: ISDN BR0/0: RX <- CONNECT pd = 8 callref =
0xCB
5d00h: Connected Number i = 0x00C3
5d00h: ISDN BR0/0: received HOST_CONNECT call_id
0x96D2
5d00h: %LINK-3-UPDOWN: Interface BRI0/0:2, changed
state to up
5d00h: %ISDN-6-CONNECT: Interface BRI0/0:2 is now
connected to 0015106511084
5d00h: ISDN BR0/0: Event: Connected to 0015106511084
on B2 at 64 Kb/s
5d00h: ISDN BR0/0: TX -> CONNECT_ACK pd = 8 callref
= 0x4B
5d00h: ISDN BR0/0: Ux_BadMsg(): Invalid Message for
call state 10, call id 0x96D
0, call ref 0x49, event 0x1310.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:32 GMT-3