From: David H. Brown (DHBrown@xxxxxxxxxxxx)
Date: Fri May 26 2000 - 14:33:33 GMT-3
I have a type 1 question, the brick wall is getting dented by my hard head.
I am running CCBootCamp lab #7, still on step one of task 2. OSPF adj
between R6 and R3 keeps going up and down, and it's driving me nuts! The
debug on R3 shows the state going to FULL then back to INIT (round and
round), and on R6 goes to FULL then DOWN and starts over. I will be
thrilled to hear how I missed something very basic here, I just don't see
it. BTW, R2-R3 works perfectly. Thanks!
David
(RTP Lab 6/15)
All routers have IOS Version: (C2500-DS56-L), Version 11.2(22)
------ ------ ------
|2503| |2510| |2513|
------ ------ ------
R6 -- frame -- R3 -- frame -- R2
S0 S0.1 -- S0.2 S0
S3:
interface Serial0
no ip address
encapsulation frame-relay
!
interface Serial0.1 point-to-point
ip address 10.100.1.3 255.255.0.0
ip ospf network broadcast
ip ospf priority 100
frame-relay interface-dlci 306
!
interface Serial0.2 point-to-point
ip address 10.101.1.3 255.255.0.0
ip ospf network broadcast
ip ospf priority 100
frame-relay interface-dlci 302
router ospf 64
network 10.101.1.3 0.0.0.0 area 0
network 10.100.1.3 0.0.0.0 area 0
!
-----------------------------------
S6:
!
interface Serial0
ip address 10.100.1.6 255.255.0.0
encapsulation frame-relay
ip ospf network broadcast
ip ospf priority 0
frame-relay map ip 10.100.1.3 603 broadcast
!
router ospf 64
network 10.100.1.6 0.0.0.0 area 0
!
-----------------------------------
S2:
!
interface Serial0
ip address 10.101.1.2 255.255.0.0
encapsulation frame-relay
ip ospf network broadcast
ip ospf priority 0
no fair-queue
frame-relay map ip 10.101.1.3 203 broadcast
!
router ospf 64
network 10.101.1.2 0.0.0.0 area 0
!
-----------------------------------
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:31 GMT-3