From: Frank K. Lu (fclu@xxxxxxxxxxxxx)
Date: Tue May 23 2000 - 10:45:51 GMT-3
For IPX/RIP, you have to use "ipx input-network-filter" or "ipx
output-network-filter" under the interface level.
For IPX/EIGRP, you have to use "distribute-list # in" or "distribute-list #
out" under the "ipx router eigrp" level.
Check:
"http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/np2_r/2
ripx.htm#31489"
for more info.
-Frank
Matthew Kinnear wrote:
> Could anyone clarify which IPX access lists are used to filter routes from
> making it to the IPX routing table. Are there any other options available
> for using extended access litst with the input/output network filter
> command, or dist list, in eigrp.
>
> Id appreciate it if someone could point me to some more complex examples on
> the web site,if poss.
>
> Thanks,
>
> Matt..
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:30 GMT-3