From: Kevin Young (kvyoung@xxxxxxxx)
Date: Sat May 20 2000 - 04:16:59 GMT-3
Ethernet.
----- Original Message -----
From: Muthu Mohanasundaram <mmsundar@yahoo.com>
To: Bill Dicks <wdicks@structure-tech.com>; 'Kevin Young' <kvyoung@sina.com>
Cc: <ccielab@groupstudy.com>
Sent: Saturday, May 20, 2000 7:57 AM
Subject: RE: distribute-list
> Hi,
>
> I think the access-list is OK.
> If you do not specify any wildcard mask, it is assumed
> as 0.0.0.0.
>
> Kevin, what networks do you have under OSPF and EIGRP?
>
> Mohan.
>
>
>
>
>
>
> --- Bill Dicks <wdicks@structure-tech.com> wrote:
> > There is a problem matching the address list...the
> > distribute-list reads it
> > as matching all..you need to specify 0.0.0.0 0.0.0.0
> > - where the wildcards
> > indicate match ALL bits. IT may interpret 0.0.0.0
> > as 0.0.0.0
> > 255.255.255.255 - which is all/anything.
> >
> > Bill Dicks
> > Structure Technologies, Inc
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com
> > [mailto:nobody@groupstudy.com]On Behalf Of Kevin
> > Young
> > Sent: Friday, May 19, 2000 9:40 AM
> > To: ccielab
> > Subject: distribute-list
> >
> >
> > Hi,guys, i met a problem as below:
> >
> > redistributing a default route(0.0.0.0/0)from
> > ospf into eigrp, when use
> > route-map, it works fine, only redistribute one
> > route(0.0.0.0/0) into eigrp:
> > router eigrp 10
> > redistribute ospf 100 route-map a
> > network 11.0.0.0
> > default-metric 64 1000 255 1 1500
> > access-list 1 permit 0.0.0.0
> > route-map a permit 10
> > match ip address 1
> >
> >
> > when use distribute-list, it doesn't work fine,
> > redsitributed all
> > routes(included 0.0.0.0/0) into eigep:
> > router eigrp 10
> > redistribute ospf 100
> > network 11.0.0.0
> > default-metric 64 1000 255 1 1500
> > distribute-list 1 out ospf 100
> > access-list 1 permit 0.0.0.0
> >
> >
> > but when use distribute-list 1 out interface , it
> > also works fine, i'm
> > puzzled, why it doesn't work using distribute-list 1
> > out ospf 100 ? what
> > about extended access-list?
> >
> >
> >
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:30 GMT-3