From: Matthew Kinnear (matt.kinnear@xxxxxxxxxxx)
Date: Thu May 18 2000 - 13:38:24 GMT-3
I beleive its like the wildcard mask in an access list , only inverted ie. 0
is wildcard..... F = 8 ones... means must match exactly.
Id guess one range is 1000 to 1FFF and the other is 2000 to 2FFF.
Maybe someone else knows better???
-----Original Message-----
From: Brian Jacklin [mailto:bmjackli@sprintparanet.com]
Sent: 18 May 2000 17:27
To: ccielab@groupstudy.com
Subject: NLSP area-address
Can someone help me to understand the NLSP area-address command a little
better.
I understand it's representing what IPX network's will participate but I'm
confussed on the mask.
Example:
int ethernet 0
ipx network 1001
ipx nlsp area1 enable
int ethernet 1
ipx network 2001
ipx nlsp area2 enable
ipx router nlsp area1
area-address 1000 fffff000
ipx router nlsp area2
area-addresss 2000 fffff000
Does this mean that area1 represents 00001000
So the leading f's represent the 0's before the 1?
So area 2 is 00002000 ?
Thanks!
Brian
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:30 GMT-3