RE: ATM LANE with specific address is not working

From: Muthu Mohanasundaram (mmsundar@xxxxxxxxx)
Date: Thu May 18 2000 - 10:13:36 GMT-3


   
Hi Greg,

I understood your LECS config. Thanks
What are the commands required for configuring LES/BUS
and the CLIENT ? For example for the Elan PARIS.

Is this configuration correct?

int atm0.1
lane client ethernet PARIS
lane server-bus ethernet PARIS
lane config-atm-address
47.00918100000000906FDE8001.CC1ECC1ECC1E.00
lane clinet-atm-address
47.00918100000000906FDE8001.CC1ECC1ECC1B.01
lane server-atm-address
47.00918100000000906FDE8001.CC1ECC1ECC1C.01
lane bus-atm-address
47.00918100000000906FDE8001.CC1ECC1ECC1D.01

If not can you please give the correct config.

Thanks

Mohan.

--- LASSERRE_Grégory <gregory.lasserre@arche.fr>
wrote:
> Hi Li,
>
> the problem is that you DID not configured the LECS
> on your router.
> You should use lane config config-atm-address
> instead of lane config-atm-address.
>
> Here is an example of what you should have :
>
> !
> lane database LECS_DB
> name PARIS server-atm-address
> 47.00918100000000906FDE8001.101010101010.10
> name PARIS elan-id 10
> name TOKYO server-atm-address
> 47.00918100000000906FDE8001.202020202020.20
> name TOKYO elan-id 20
> !
> !
> interface Ethernet0
> !
> interface ATM0
> atm preferred phy A
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> lane config config-atm-address
> 47.00918100000000906FDE8001.CC1ECC1ECC1E.00
> lane config database LECS_DB
> !
>
> Best regards.
> Greg.
>



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:29 GMT-3