From: Vijay Venkatesh (vijay.venkatesh@xxxxxxx)
Date: Wed May 17 2000 - 18:42:56 GMT-3
No but am sure there is a way to change the mac as it seen by tha cam on
a switch. Connect up the ether to a switch port and change mac an dthen
do a sho cam ans see if the advertised mac has changed to the one that
you changed it to. Yes, the bia is in the rom ... logically the bia can
b readdressed - this means not the bia address but the advertised mac
Vijay.
"Joel W. Ekis" wrote:
>
> You can alter the logic MAC with an interface command. The BIA is the Burned
-In MAC (i.e. coded into ROM) and cannot be changed.
>
> Joel
>
> At 12:16 PM 5/17/2000 -0700, Brett Smith wrote:
> >To change an Ethernet or Token ring MAC, under the interface configuration:
> > mac-address H.H.H
> >
> >
> >
> >-----Original Message-----
> >From: Jeff Sapiro [mailto:jeffsapiro@yahoo.com]
> >Sent: Wednesday, May 17, 2000 11:59 AM
> >To: ccielab@groupstudy.com
> >Subject: BIA MAC: is there a command to alter?
> >
> >
> >
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:29 GMT-3