From: Wayne Hu (wayneccie@xxxxxxxxx)
Date: Mon May 15 2000 - 11:58:42 GMT-3
Thanks Chad
Mode configuration really works for my mobile users,
but I had problem to setup more than one user
accessing at the same time. It seems the second user
crash the first user's the connetion, do I have to set
multiple dynamic crypto map for mutliple users.
Thanks
wayne
--- Chad Marsh <chad@wa.net> wrote:
> You'll have to do what Cisco calls a "mode"
> configuration, since the host
> has a dynamically assigned address, there is no way
> to program the Router
> (assuming it's a router) for what address to peer
> with on the crypto map.
> This way the router assigns a bogus internal address
> to the client, from a
> local pool, then references that address range for
> the crypto components.
>
> See here:
> http://www.cisco.com/warp/public/707/25.html
>
> or here for PIX:
> http://www.cisco.com/warp/public/110/37.html
>
> Chad Marsh
> CCIE # 5185
>
>
> ----- Original Message -----
> From: "Wayne Hu" <wayneccie@yahoo.com>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, May 13, 2000 3:38 PM
> Subject: IPSec Question
>
>
> > Hi,
> > I have problem to setup pre-share key on VPN host,
> > because the Remoute Client using Dial-up ISDN with
> no
> > Static IP address. Can I use wildcard in the
> command
> > line crypto isakmp key Cisco address 0.0.0.0, if
> not,
> > how can I implement this?
> >
> > Thanks
> >
> > wayne
> >
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:29 GMT-3