From: Kai_Welsch@xxxxxxx
Date: Sat May 13 2000 - 12:19:22 GMT-3
Hi
The solution for your Problem may be floating static routes.
Configure Loopback´s on both sides and take these adresses to your routing
protocol.
Then configure a floating static route to the other side over the BRI
Interfaces.
Dom`t forget the passive interface command
regards
Mit freundlichen Grüßen
Kai Welsch / wk , GS KA Systemengineer
NEEF-Elektrotechnik GmbH & Co
Systemhaus für Gebäude- und Kommunikationstechnik
Unternehmen der Sulzer Infra
Windeckstrasse 9 76135 Karlsruhe
Tel: +49 721/8606-238
Fax: +49 721/8606-232
E-Mail/Internet: Kai_Welsch@neef.de
Notes: Kai Welsch/Infra CS @SULZERINFRA
Website: http://www.neef.de/
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:29 GMT-3