From: stiff (stiff.yu@xxxxxxxxxxxxxxxxxx)
Date: Sat May 13 2000 - 01:41:21 GMT-3
hi,Lee,
I have try it,you are right.thank you.
-----Original Message-----
From: Lee, Vaughan <vaughan.lee@debis.co.uk>
To: 'stiff' <stiff.yu@datacraft-asia.com>
Cc: ccielab@groupstudy.com <ccielab@groupstudy.com>
Date: 2000Äê5ÔÂ11ÈÕ 17:58
Subject: RE: telenet question
>To return from R3 to R2, use the sequence Ctrl-Shift-6, Ctrl-Shift-6, x.
>
>You can daisy chain telnets between a number of routers, and move between
>them by using various numbers of escapes (Ctrl-shift-6). Escape, x moves
you
>back to your 'root' router. Escape, escape, x moves you to one router down
>from the root. Escape, escape, escape, x moves you to two routers down from
>the root etc.
>
>I found this by accident, and although I don't use it often, have found
>occasions where it's useful.
>
>Regards,
>Vaughan
>
>
>Vaughan Lee, Network Specialist.
>CCIE #5250
>debis IT Services (UK) Ltd.
>E-mail: vaughan.lee@debis.co.uk
>Direct Phone: 01908 279561
>Direct Fax: 01908 279061
>http://www.debis.co.uk/ <http://www.debis.co.uk/>
>
>
>
>
>
>-----Original Message-----
>From: stiff [mailto:stiff.yu@datacraft-asia.com]
>Sent: 11 May 2000 09:59
>To: ccielab@groupstudy.com
>Subject: telenet question
>
>
>hellow every,
>I have a simple question,when telnet from R1 to R2,the R2 to R3,
>I want to return from R3 to R2,I can't do it,because I use Ctrl+Shift+6+x
>I will return form R3 to R1.I need you help.
>
>regards
>
>--------------------------------------------------------
>YU JIAN CHUN
>CSD engineer of Datacraft-china ltd.
>tel:(8610) 65882123
>fax:(8610)65882110
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:29 GMT-3