From: Kevin Young (kvyoung@xxxxxxxx)
Date: Thu May 11 2000 - 02:57:44 GMT-3
the answer is:
R3: router os 100
area 0 auth mess
int e0
ip os mess 1 md5 cisco1
ip os mess 2 md5 cisco2
R1: router os 100
area 0 auth mess
int e0
ip os mess 1 md5 cisco1
R2: router os 100
area 0 auth mess
int e0
ip os mess 2 md5 cisco2
----- Original Message -----
From: wang xihan <wangxh@nts.net.edu.cn>
To: Kevin Young <kvyoung@sina.com>
Cc: ccielab <ccielab@groupstudy.com>
Sent: Thursday, May 11, 2000 12:46 PM
Subject: Re: ospf challenge
> Hi
> Thank you for you reply
> I mean when you change the priority to 0, you still can see other nei when y
ou use
> show ip ospf nei , How can i managee to make R3(DR) can see all the nei and r
1,r2 can only see r3
> Thanks
> xihan wang
>
>
>
>
>
>
>
> ----- Original Message -----
> From: Kevin Young <kvyoung@sina.com>
> To: wang xihan <wangxh@nts.net.edu.cn>
> Cc: ccielab <ccielab@groupstudy.com>
> Sent: Thursday, May 11, 2000 12:07 PM
> Subject: Re: ospf challenge
>
>
> > try to change the r1 and r2's ethernet interfaces' priority to zero.
> > ip ospf pri 0
> >
> >
> >
> >
> > **************************************
> > Kevin Young
> > Senior Network Engineer
> > Yinxi Electronic Information Co.,Ltd
> > (86)-10-82625798 x 810
> > **************************************
> >
> > ----- Original Message -----
> > From: wang xihan
> > To: kongck ; ccielab@groupstudy.com
> > Sent: Thursday, May 11, 2000 10:49 AM
> > Subject: ospf challenge
> >
> >
> > Hi all
> > Thank you for the reply , i think i get it.
> > Here is another quesion.
> > In a ethernet ospf area , There are three router connect to each other(
r1,r2,r3), For security reasons, I would like r3 to be the DR, and all router w
ill adjacent to R3 and will not make adjacent to others, That means when i show
ip ospf nei in other routers, only r3 can see r1 and r2, in either r1 and r2 ,
they can only see r3. There should be some thing can do it.Can sb tell me how?
> > Thanks a lot
> > xihan wang
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:28 GMT-3