From: Richard Wagner (rwagner@xxxxxxxxxx)
Date: Mon May 08 2000 - 19:48:27 GMT-3
I've loaded NetBEUI on both machines and it just worked! Just make sure
that the workgroup names are in there and that some sharepoints are
available.
The reachability cache fills up when the NetBEUI machines broadcast out...
which is often.
So... from one machine... choose start/run, and then \\machinename
If it doesn't work, check your routers. (remember source-bridge spanning
commands on token ring).
use these commands to see what's up
show dlsw reachability
show dlsw peer
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Erik Belz
Sent: Monday, May 08, 2000 3:35 PM
To: ccielab@groupstudy.com
Subject: NetBIOS Dlsw
Ok,
I'm tying to test dlsw source-route transparent over ip cloud to ethernet
transparent.
What exactly has to be done on the microsoft side?? Will I see the NetBIOS
names int the reachability cache??
I have two laptops on both ends. one on token ring the other on ethernet..
any help is appreciated.
thanks,
Erik
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:28 GMT-3