From: wyan@xxxxxxxxxx
Date: Thu May 04 2000 - 00:53:26 GMT-3
You need to summarize the 30-bit and 28-bit subnets to a 24-bit subnet with
a
static route. Check the case study on P.730 of Doyle's Routing TCP/IP. That
may help.
Weidong Yan
---------------------- Forwarded by Weidong Yan/Markham/IBM on 05/03/2000
11:47 PM ---------------------------
"Ben Rife" <brife@bignet.net> on 05/01/2000 04:31:24 PM
Please respond to "Ben Rife" <brife@bignet.net>
To: ccielab@groupstudy.com
cc:
Subject: OSPF Routing
Hey Gang!
Question:
I have a frame backbone running OSPF Area 0. Two of the spokes are
connected via ISDN as well. (Address spaces vary from /24, /30, /28, etc
for 140.100.0.0 address.)
The hub router is also connected to an IGRP domain (/24 for 140.100.0.0).
The problem I am having is that I can't seem to get the ISDN link
140.100.5.0/30 advertised to the IGRP domain. The ISDN link is in AREA 0. I
believe that if the link was in another area (ie 3), I could use the well
known, area 3 range... cmd).
What do I do, since it is in Area 0 and is connected to the ASBR?
Any ideas?
Thanks,
Ben
Hey Gang!
Question:
I have a frame backbone running OSPF Area 0. Two of the spokes are
connected via ISDN as well. (Address spaces vary from /24, /30, /28,
etc for 140.100.0.0 address.)
The hub router is also connected to an IGRP domain (/24 for
140.100.0.0).
The problem I am having is that I can't seem to get the ISDN link
140.100.5.0/30 advertised to the IGRP domain. The ISDN link is in AREA
0. I believe that if the link was in another area (ie 3), I could use
the well known, area 3 range... cmd).
What do I do, since it is in Area 0 and is connected to the ASBR?
Any ideas?
Thanks,
Ben
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:27 GMT-3