From: Bill Dellamar (wdellamar@xxxxxxxxx)
Date: Fri Apr 28 2000 - 10:25:10 GMT-3
Eric,
why is the dialer map statement on R2 pointing to
600.5 instead of 900.5?
dialer map appletalk 600.5 name r5 broadcast
18008358662
I think it should be:
dialer map appletalk 900.5 name r5 broadcast
18008358662
Any thoughts?
Bill
--- Erik Belz <ebelz@mecnet.com> wrote:
> I have r2 connected to r5 via ISDN every protocol
> works fine over the link. Snapshot for IPX works
> great, Snapshot for IP RIP works great however I've
> read every documentation on Snapshot with RTMP and
> even pasted a sample config from Cisco's web site
> and still I cannot exchange routing updates for RTMP
> via snapshot routing enclosed is config for r2 and
> r5. Any help is greatly appreciated.
>
> FYI.....IOS is 11.2(17) on r5 and 11.2(16) on r2
>
> ****************************************************
>
> r2#sh ru
> Building configuration...
>
> Current configuration:
> !
> version 11.2
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname r2
> !
> !
> username r5 password 0 cisco
> appletalk routing
> isdn switch-type basic-ni1
> !
> interface Ethernet0
> no ip address
> appletalk cable-range 500-500 500.146
> appletalk zone zone5
> !
> interface Serial0
> no ip address
> shutdown
> !
> interface Serial1
> no ip address
> shutdown
> !
> interface BRI0
> no ip address
> encapsulation ppp
> appletalk cable-range 900-900 900.2
> appletalk zone wan
> dialer map appletalk 600.5 name r5 broadcast
> 18008358662
> dialer-group 1
> snapshot server 5 dialer
> no fair-queue
> ppp authentication chap
> ppp multilink
> !
> no ip classless
> !
> dialer-list 1 protocol appletalk permit
> !
> line con 0
> line aux 0
> line vty 0 4
> login
> !
> end
>
>
>
> *************************************
>
> r5#sh ru
> Building configuration...
>
> Current configuration:
> !
> version 11.2
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname r5
> !
> !
> username r2 password 0 cisco
> appletalk routing
> isdn switch-type basic-ni1
> !
> interface Ethernet0
> no ip address
> appletalk cable-range 200-200 200.49
> appletalk discovery
> !
> interface Serial0
> no ip address
> shutdown
> !
> interface Serial1
> no ip address
> shutdown
> !
> interface BRI0
> no ip address
> encapsulation ppp
> appletalk cable-range 900-900 900.5
> appletalk zone wan
> isdn spid1 0835866201 8358662
> isdn spid2 0835866401 8358664
> dialer idle-timeout 330
> dialer map snapshot 1 name r2 broadcast 18008358661
> dialer map appletalk 900.2 name r2 broadcast
> 18008358661
> dialer load-threshold 3 outbound
> dialer-group 1
> snapshot client 5 8 dialer
> no fair-queue
> ppp authentication chap
> ppp multilink
> !
> no ip classless
> !
> dialer-list 1 protocol appletalk permit
> !
> line con 0
> line aux 0
> line vty 0 4
> login
> !
> end
>
>
>
>
>
> Erik C Belz
> Senior systems engineer
> Manchester Equipment Co
> (212)560-5459
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:16 GMT-3